TDM relej za DI i TC signalizaciju potopne pumpe …

Nadzorni relej za kontrolu temperature i prodora vode u komorama potopnih pumpi, miksera , mješaća ..                                                 

 TDM  Relay  for control of temperature and sealing in pumps , mixer

                                                 User's Manual

1. Working principle:

 - At power up the relays are activated and the LED "POWER" is light up,

alarm contacts are opened and contact for pump control is closed.

- When the thermostat in the pump opens due to high temperature in the

motor winding the LED ''Temp./TCS'' is light up, the alarm contact is closed and the control circuit contact is opened. When the temperature drops, the systems automatically resets.

- When the resistance between the sealing electrode in the pump and earth

decreases to approx. 27 kOhm (due to water ingress) the LED "Sealing/DI" is light up and the alarm contact is closed. The alarm automatically resets when the resistance again increased.

2. Wiring:

3. Technical data :

 Power supply                                   230V/50-60Hz

Power consumption                         2.2VA

Maximum load on relay                   250V 6A resistive, 2A inductive

Voltage to sealing electrode            24V

Connection                                      11 pole relay socket

Working temperature                       0° - 40°C

Humidity                                           0-80%

Degree of protection                        IP 20

The relay is in accordance with CE regulations.

 Sulzer / Abs tdm relays , Flygt MiniCAS II Pump Sensor Monitor , Safety box LT2-A , Abs Ca 461 Sulzer