TDM relej za DI i TC signalizaciju potopne pumpe …
Nadzorni relej za kontrolu temperature i prodora vode u komorama potopnih pumpi, miksera , mješaća ..
TDM Relay for control of temperature and sealing in pumps , mixer
User's Manual
1. Working principle:
- At power up the relays are activated and the LED "POWER" is light up,
alarm contacts are opened and contact for pump control is closed.
- When the thermostat in the pump opens due to high temperature in the
motor winding the LED ''Temp./TCS'' is light up, the alarm contact is closed and the control circuit contact is opened. When the temperature drops, the systems automatically resets.
- When the resistance between the sealing electrode in the pump and earth
decreases to approx. 27 kOhm (due to water ingress) the LED "Sealing/DI" is light up and the alarm contact is closed. The alarm automatically resets when the resistance again increased.
2. Wiring:
3. Technical data :
Power supply 230V/50-60Hz
Power consumption 2.2VA
Maximum load on relay 250V 6A resistive, 2A inductive
Voltage to sealing electrode 24V
Connection 11 pole relay socket
Working temperature 0° - 40°C
Humidity 0-80%
Degree of protection IP 20
The relay is in accordance with CE regulations.
Sulzer / Abs tdm relays , Flygt MiniCAS II Pump Sensor Monitor , Safety box LT2-A , Abs Ca 461 Sulzer
